Jumpwind Thinner solvent CT01/CT02/CT03/CT05/CT08.

CT-01 Standard Thinner - Using JUMPWIND CT-01 oil-based paint mix the paint and the mixture in a ratio of 1:1.5-1.2.5.

This product is a standard quick-drying diluent. If you need to make the coating surface smoother or perform painting operations in a humid environment please use CT.02 slow-drying diluent.

CT-02 leveling Thinner - When using JUMPWIND oily paint dilute the paint and diluent at a ratio of 1:1.5~1:2.5

This product is a slow-drying diluent. If you need to speed up the drying of the coating or do light and shadow coating please use CT.01 standard diluent.

CT-03 Tools Cleaner - After the model is painted use this cleaning fluid to soak or wipe the painting tools to effectively dissolve paint and other residues on the tools

This product is a special cleaning fluid for model painting tools. Do not use it for cleaning model parts or diluting paint.

CT-05 Metallic Thinner - When using JUMPWIND oily paint dilute the paint and diluent at a ratio of 1:2.5~1:3

This product is a special diluent for metallic colors and is not suitable for painting in colors other than metallic colors.

CT-08 Tools Cleaner - After the model is painted use this cleaning fluid to soak or wipe the painting tools to effectively dissolve paint and other residues on the tools

This product is a special cleaning fluid for model painting tools. Do not use it for cleaning model parts or diluting paint.

COLOR THINNER Series CT.08 Painting Tool Cleaning Liquid [Low Odor Type]. CT-08 Paint Cleaner significantly reduces odors and has the same cleaning power as conventional products. It can effectively reduce the odor generated in the model manufacturing environment.

It is recommended to clean the painting tools after each painting.

CT.04 coating remover is a product developed for model repainting. Based on the solubility parameters between the model substrate and the model specific coating a large number of different materials are compounded and tested. It has a very mild cleaning effect and can dissolve the dried coating film without damaging the model substrate. Suitable for cleaning and recoating coated models removing electroplating coatings and removing release agents for GK parts (two component cured polyurethane).

Usage:

When it is necessary to remove the coating on the surface of the part use this product to soak or wipe the pr remove the coating This product is a coating specific cleaning solution and is not suitak for cleaning coating tools or diluting coatings This product is suitable for substrates such as PS ABS PVC PC and resin parts. If you want to use it on other substrates please conduct a small amount of testing first If you need to mix with other types of diluents please conduct a small amount of mixing test before use 不 Please use CT.03 coating tool cleaning solution for tool cleaning